We're Hiring
Apply Now!

 

Lite Commercial Post-Frame Entry / Walk Doors

“Meets Uniform Load Structural Requirements for all U.S. coastal building zones.”
5100 & 7100 Series Commercial Post Frame Entry / Walk Doors

Style and Strength
• Rolled edge door panel of 24-gauge polyester painted galvanized steel creates a smooth look that will complement your building
• Rolled steel edges wrap around heavy internal aluminum (5100 Series) stiles and rails that bond with the polyurethane foam to create a seamless rigid panel
• Heavy-duty 16-gauge 3 1/2” wide painted steel jambs
• 12-gauge stainless steel 4 1/2” x 4” fixed pin hinges for durability and security
Protection Against the Elements

• High performance replaceable bulb and leaf weatherseal of extruded Santoprene® remains flexible in all temperature extremes
• Aluminum parting stop in header frame enhances weather protection
• Bulb and wand Alcryn® sweep gives greater weather resistance over ordinary PVC sweeps
• R-12 insulation value from a panel of injected polyurethane foam (2.2 pounds per cubic foot) protects against external temperaturesDistinctive Details
• 4-way universal swing prevents problems with last minute jobsite changes
• Low-profile ADA-approved aluminum sill
• Factory prepped with aluminum reinforcing blocks at lock, deadbolt, panic hardware and closer locations to allow for flexibility during installation
• 2 3/4” backset with a 2 1/8” diameter lock
bore holeOptions to Fit Your Needs
· Sizes from 2’0″ to 4’0″ wide and 6’8 and 7’0″ high available
· Single-glazed and insulated tempered door lites
· Grids available on insulated 9-Lite and Fullview Lites
· Crossbuck pattern on both interior and exterior
· Insulated 1-lite and Insulated Vent Lite
•  Custom Colorization Available
Click here to download Vent Lite Specs
Thermal Barrier to Reduce Wintertime Heat Loss, Summertime Heat Gain and the Risk of Interior Condensation
• Polypropylene thermal break in the 16-gauge steel jambs
• Reblocks of high density molded urethane at the lock bore, deadbolt, closer and panic hardware prep locations
• Pultruded fiberglass stiles and rails create a thermal break on the rollformed panelPultruded Fiberglass:
Superior Structure and Low Thermal ConductivityPultruded fiberglass ensures that your door will hold up to the weather extremes that Mother Nature emits. This high performance material is corrosion resistant and electrically insulative.

AJ Walk Doors comply with all requirements of the 2014 Florida Buiding Codewith the exception of HVH Zones to pressures of +55.0/-60.6 (>140 mph coastal wind zones).

To view test data and drawings go to http://floridabuilding.org/c/default.aspx, click on “product Approval”, “Find a Product or Application”, and enter AJ’s application number. # 7648.

Note: all downloads are in PDF format. If you do not have Adobe Acrobat Reader, Click here for a free copy.
5100 & 7100 Installation Instructions
Double Door Installation Instructions
Drawing of Astragal for Double Door Installation